READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2005 HP Product Name: ASAP Hybrid Extension for Linux Product ID: SE34V1 Component Products: T0405V01, 31JAN2005 I. Basic Product Installation Instructions 1. Ensure that requirements for using this product are met (see Section II Product Requirements below). 2. Ensure that prerequisites for the installation utility and any product-specific installation requirements are met (see Section III Installation Prerequisites below). 3. Follow the installation instructions in Section IV below, if any, to install the product on your workstation. 4. Follow the post-installation instructions in Section V below, if any, after installing this product. II. Product Requirements Required Hardware: Intel x86- or AMD64- based system Minimum OS Release: Red Hat Enterprise Linux 3 Disk Space Requirement: 10 MB Memory Requirement: 256 MB III. Installation Prerequisites None IV. Installation Instructions 1. Copy the asaphybridforlinux.1.0.7.tar.gz archive file from the WS_SW directory on the CD to the Linux system. The file can be copied to any directory to which you have access, but ideally the directory should be empty and should be named appropriately (for example, asaphybrid.1.0.7). This directory is referred to throughout the remainder of this document as the "installation directory". 2. Extract the files contained in the archive using the tar command with the –xzvf options. For example: tar -xzvf asaphybridforlinux.1.0.7.tar.gz This will create five subdirectories within the installation directory: bin, doc, include, lib, and sample, and place the appropriate files in them. 3. You can leave the files in these locations, which is the recommended approach. This makes it easier to manage the ASAP Hybrid file set, and simplifies the process of upgrading to newer versions of ASAP Hybrid as they are released. However, you can move the files to the standard Linux locations (/usr/include for the header file, /usr/lib for library files, etc.) or any other location if you’d prefer. This is perfectly acceptable; the only restrictions are: - The server configuration file (asap.conf), if you choose to create one, must reside in the same directory as the Linux server executable (asapxserver.1.0.7). The server reads this configuration file at startup, and expects to find it in the same directory as the program executable. - The directory containing the Linux server executable must be secured such that files can be created and written in that directory. The server can optionally create files at run time, including log files, trace files, and domain status files. These will be located in the same directory as the program executable. - Both asapremove* files must be located in the same directory. - Both asapxserver* files must be located in the same directory. - The three libasapx.a.* files must be located in the same directory. - The three libasapx.so.* files must be located in the same directory. - The three libasapx64.a.* files must be located in the same directory. - The three libasapx64.so.* files must be located in the same directory. V. Post-Installation Instructions None VI. Manuals Included On this CD 529729-001 HP NonStop ASAP Hybrid Manual VII. CD-ROM Root Directory Contents License.txt File containing limited-use Software Licensing Agreement with the licensing terms governing this product. ReadMe.txt File containing product and installation information (this file). WS_SW Subdirectory containing Linux component files. SOFTDOCS Subdirectory containing product Softdoc. CD_DOCS Subdirectory containing product documentation. PDF_DOCS Subdirectories of CD_DOCS containing: 1. Product manuals in PDF format for viewing with Adobe Acrobat Reader 2. ACROBAT_VIEWER providing Adobe URL for downloading the latest Adobe Acrobat Reader. Visit Adobe's website at http://www.adobe.com